Electrical Engineer Test Part-3

FemaleMale
20 Questions - Developed by:
- Developed on: - 4,937 taken - 2 people like it

Electrical Engineer Test Part-3 (V-1.7) (Question-41-60)

  • 1
    41. The staring torque of a capacitor start motor is
  • 2
    42. A capacitor start single phase induction motor will usually have a power factor of
  • 3
    43. A capacitor start, capacitor run single phase induction motor is basically a

  • 4
    44. The torque developed by a split phase motor is proportional to
  • 5
    45. A capacitor start single phase induction motor is switched on the supply with its capacitor replaced by an inductor of equivalent reactant value. It will
  • 6
    46. The number of turns in the starting winding of a capacitor start motor as compared to that for split phase motor is

  • 7
    47. In a split phase motor, the ratio of number of turns for starting winding to that for running winding is
  • 8
    48. A single phase motor generally used for small air compressor is
  • 9
    49. Out of the following motors, which will give the highest starting torque?
  • 10
    50. Which single phase ac motor will you select for record players and tape recorders?

  • 11
    51. A universal motor is one
  • 12
    52. Under normal operating conditions which motor can run at 5000 rpm?
  • 13
    53. Which motor is generally used for electric shavers
  • 14
    43. The starting capacitor of a single phase motor is
  • 15
    44. The motor used in household refrigerators is
  • 16
    1. Transistor is a _______ terminal device.

  • 17
    2. The Three Terminal of transistor are:
  • 18
    3. The Transistor means ____
  • 19
    4. BJT is a _____ device.
  • 20
    5. In Unipolar transistor, the current conduction is due to ____

Comments (0)

autorenew